Home > Blog > How Super Springs Increase Load Capacity

How Super Springs Increase Load Capacity

Vehicles with very heavy loads often have one problem that is not seen by others. That is the drastic difference in load on the suspension when the vehicle is loaded and empty. This may not seem like an important factor to consider, but if you have a very heavy suspension for large loads, this can cause problems when the load is absent and the vehicle rides too high causing improper maneuverability of the vehicle.

Likewise, if you only use lighter weight factory leaf springs on the vehicle, you can expose them to excess wear and potential damage when they are overloaded with an occasional heavy load. When you need to figure out what to do with different loads, it is best to work with experts who have been an automotive leaf spring and suspension authority since 1965, the team at General Spring.

What will Super Springs from General Spring do for You?

At General Spring we carry a line of products called Super Springs that are designed to be easily installed alongside your standard leaf springs. The design of these springs is to progressively absorb the excess load only when necessary and/or when the factory springs flatten out. When this happens the rollers at the end of the Super Springs automatically activate and engage to take the weight of the remaining load so that it does not cause excess stress and strain on the leaf springs that are already in place. Super Springs allow for optimal driving conditions you’re your vehicle is heavily or lightly loaded.

Super Springs are designed to match the existing leaf springs of a vehicle so they are available in the various lengths needed. They are available in heavy-duty, medium-duty and light-duty variations so that you can choose the right addition for your desired task. Increase the load to what you need without compromising on the performance and handling of your vehicle.

When you Need Suspension Advice Turn to the Experts

It can be complicated figuring out what is best solution for the suspension on your vehicle. That is why our dedicated service professionals are the same technical team that installs suspension products in our full service shop. By both designing and installing suspension products, our team can answer all of the important technical questions you have. They also know the technical questions you may forget to ask, but are still incredibly important for what you may need.

So, it doesn't matter if you need replacements for old springs, or to replace cracked and broken springs, we can help! We are even able to steer you towards heavy duty springs if that is what you need to improve your suspension. For your piece of mind, we always check every spring we sell for quality and correct manufacturing before shipping it out to you.

So if you are ready to find out what Super Springs can do for you give us a call. If you are local to New Century, KS call us at 913-829-0619, and national customers can call us toll free at 1-888-829-0619. We are ready to serve you with the highest quality products and services you need to keep your vehicle running at its best.

Sort By:
Page of 1
SSA9 SuperSprings Helper Spring

SuperSprings Self-Adjusting Suspension Stabilizers work with your current suspension to reduce sway and increase load capacity while never needing any adjustments due to the roller design.

  • Increase Load and Tow Capacity without Increasing Ride Stiffness
  • Reduce Sway - Independently tested to give 29% improvement in driver control
  • Maintenance Free and No Adjustments Needed
  • Easy to Install - Most Kits Install in Less than 30 Minutes
  • Limited Lifetime Warranty
  • Sold as Kit - Order 1 per Vehicle
  • Free Shipping to Continental U.S.
  • Dimension - 47" Long x 3" Wide x .447 gauge
  • 1300 Pounds Spring Capacity Increase

SuperSprings are progressive in nature in that they work on an as-needed basis. The installed springs are under nominal tension even when the vehicle is unloaded. This is so there is no rattle or noise and the patented rollers will activate automatically.

As a vehicle with rear leaf springs comes under load the factory springs react as they are designed to. The center of the springs move vertically causing the overall leaves to flex and flatten out. This movement in the factory spring activates the SuperSpring through the rollers at the end of each leaf. Because the SuperSpring rollers aSupersprings Shacklere under tension, a movement in the factory spring causes them to move, seeking their new point of least resistance. This simple roller principal allows the SuperSprings to activate and deactivate automatically, free of any manual adjustment.

The SuperSprings are length specific to fit varying sized leaf springs. In addition the different lengths typically are manufactured in light, medium and heavy duty strengths. The sole adjustment on the SuperSprings is found in the roller shackles at the end of each leaf. The typical shackle has two bolt holes, as shown in the diagram below though some single hole and three holed shackles are used. The most common installation involves positioning all four rollers in the lower (furthest from the eye of the SuperSpring / closest to the ground) bolt holes. This ensures the least amount of preload tension on the SuperSprings and keeps the vehicle closest to its original factory ride conditions. Upper bolt holes may be used if additional lift is desired in the vehicle; if clearance from obstructions is required or if the installation is on an older vehicle with some fatigue in the springs.

SuperSprings enhance load carrying capacity, handling and towing. Do not load any vehicle beyond the manufacturers gross vehicle weight rating.

Our Price: $299.99
SSA8 SuperSprings Helper Spring

SuperSprings Self-Adjusting Suspension Stabilizers work with your current suspension to reduce sway and increase load capacity while never needing any adjustments due to the roller design.

  • Increase Load and Tow Capacity without Increasing Ride Stiffness
  • Reduce Sway - Independently tested to give 29% improvement in driver control
  • Maintenance Free and No Adjustments Needed
  • Easy to Install - Most Kits Install in Less than 30 Minutes
  • Limited Lifetime Warranty
  • Sold as Kit - Order 1 per Vehicle
  • Free Shipping to Continental U.S.
  • Dimension - 44" Long x 3" Wide x .447 gauge
  • 1500 Pounds Spring Capacity Increase

SuperSprings are progressive in nature in that they work on an as-needed basis. The installed springs are under nominal tension even when the vehicle is unloaded. This is so there is no rattle or noise and the patented rollers will activate automatically.

As a vehicle with rear leaf springs comes under load the factory springs react as they are designed to. The center of the springs move vertically causing the overall leaves to flex and flatten out. This movement in the factory spring activates the SuperSpring through the rollers at the end of each leaf. Because the SuperSpring rollers aSupersprings Shacklere under tension, a movement in the factory spring causes them to move, seeking their new point of least resistance. This simple roller principal allows the SuperSprings to activate and deactivate automatically, free of any manual adjustment.

The SuperSprings are length specific to fit varying sized leaf springs. In addition the different lengths typically are manufactured in light, medium and heavy duty strengths. The sole adjustment on the SuperSprings is found in the roller shackles at the end of each leaf. The typical shackle has two bolt holes, as shown in the diagram below though some single hole and three holed shackles are used. The most common installation involves positioning all four rollers in the lower (furthest from the eye of the SuperSpring / closest to the ground) bolt holes. This ensures the least amount of preload tension on the SuperSprings and keeps the vehicle closest to its original factory ride conditions. Upper bolt holes may be used if additional lift is desired in the vehicle; if clearance from obstructions is required or if the installation is on an older vehicle with some fatigue in the springs.

SuperSprings enhance load carrying capacity, handling and towing. Do not load any vehicle beyond the manufacturers gross vehicle weight rating.

Our Price: $319.99
SSA28 SuperSprings Helper Spring

SuperSprings Self-Adjusting Suspension Stabilizers work with your current suspension to reduce sway and increase load capacity while never needing any adjustments due to the roller design.

  • Increase Load and Tow Capacity without Increasing Ride Stiffness
  • Reduce Sway - Independently tested to give 29% improvement in driver control
  • Maintenance Free and No Adjustments Needed
  • Easy to Install - Most Kits Install in Less than 30 Minutes
  • Limited Lifetime Warranty
  • Sold as Kit - Order 1 per Vehicle
  • Free Shipping to Continental U.S.
  • Dimension - 42" Long x 3" Wide x .558 gauge
  • 1500 Pounds Spring Capacity Increase

SuperSprings are progressive in nature in that they work on an as-needed basis. The installed springs are under nominal tension even when the vehicle is unloaded. This is so there is no rattle or noise and the patented rollers will activate automatically.

As a vehicle with rear leaf springs comes under load the factory springs react as they are designed to. The center of the springs move vertically causing the overall leaves to flex and flatten out. This movement in the factory spring activates the SuperSpring through the rollers at the end of each leaf. Because the SuperSpring rollers aSupersprings Shacklere under tension, a movement in the factory spring causes them to move, seeking their new point of least resistance. This simple roller principal allows the SuperSprings to activate and deactivate automatically, free of any manual adjustment.

The SuperSprings are length specific to fit varying sized leaf springs. In addition the different lengths typically are manufactured in light, medium and heavy duty strengths. The sole adjustment on the SuperSprings is found in the roller shackles at the end of each leaf. The typical shackle has two bolt holes, as shown in the diagram below though some single hole and three holed shackles are used. The most common installation involves positioning all four rollers in the lower (furthest from the eye of the SuperSpring / closest to the ground) bolt holes. This ensures the least amount of preload tension on the SuperSprings and keeps the vehicle closest to its original factory ride conditions. Upper bolt holes may be used if additional lift is desired in the vehicle; if clearance from obstructions is required or if the installation is on an older vehicle with some fatigue in the springs.

SuperSprings enhance load carrying capacity, handling and towing. Do not load any vehicle beyond the manufacturers gross vehicle weight rating.

Our Price: $329.99